Technological principles

SIZE

PRIVA-LITE CLASSIC
 
Maximum size: 
Standard - 1000 x 3000 mm (1000 x 3750 mm on demand) with a single LC film,
2000 x 3000 mm with two LC films located next to each other in a same pane. 
Minimum size: 
200 mm x 300 mm.
 
PRIVA-LITE XL
Maximum size: 
Standard - 1500 x 3000 mm (1820 x 3500 mm on demand) only single LC film
Minimum size:
200 mm x 300 mm.

 SAFETY

The liquid crystal film is hermetically sealed between two glass sheets, there is no risk in touching a PRIVA-LITE panel, even on the edge, when in the "on" position. Furthermore, it is IPX7 rated.

POWER SUPPLY UNIT

Standard (max 6m2): 180 x 133 x 46mm, 1 kg
Other (max 15m2): 240 x 190 x 120 mm, 10 kg.
 
LIGHT TRANSMITION

Light transmittance almost identical in both states - transparent and translucent.

 ELECTRODES AND CABLE EXIT

Depending on the size of the glass-pane, both electrodes can be positioned either on top, at the bottom, on the right or left side, with the exit of the cable at the centre of the electrodes side.

 CUTTING HOLES AND NOTCHES

The glazing is delivered in the required dimension. No further cutting or drilling is possible. Hole and notches are possible under specific conditions. In the event of a hanging screen, the anchor holes have to be and located in a zone without LC film.

 WARRANTY

GLASSOLUTIONS gives a 5-year glass warranty on the functionality of the PRIVA-LITE. This guarantee is valid only if the instructions contained in our installation and maintenance guide are followed.

LIGHT TRANSMISSION

Single glazing PRIVA-LITE 55.4(12mm)

  ON OFF
Light transmission* 77% 76%
Light reflection* 19% 18%
Haze (level of blur)* 7.5% 90%
Solar factor* 63% 64%
Ug (W/m2) 5.6 to 5.8 5.6 to 5.8
Rw (C; Ctr) 38 (-2;-3) dB 38 (-2;-3) dB

* The spectrophotometric data are given with a tolerance of +- 2%

 

See more detailed information on PRIVA-LITE